Welcome to Luoyang Bota Heavy Industry Machinery Equipment Co., Ltd website!

Luoyang Bota Heavy Industry Machinery Equipment Co., Ltd

Product Center

产品PRODUCT
PRODUCTpower tower

Welding Machine for Single & Double Shell Poles

Welding Machine for Single & Double Shell Poles

  Single shell & Double shell poles welding, starting from bended shells.
  Bota-weld provide wide and flexible solutions by its new Welding Machine for Single & Double Shell Poles with an innovative shell coupling system, high quality welding, high welding penetration, conical round & polygonal poles welding, poles straightened, that make suitable this machine for poles production plant with a wide range of poles production typology.
  Bota-weld’s Welding Machine for Single & Double Shell Poles can easily be operated and carried thanks to its user friendly interface. It's produced with latest production technologies able to guarantee the best results in term of poles welding.
  Used for steel poles production, represent the solution for company that wants to produce poles (conical round & polygonal poles) with very wide range of poles typology with very high quality, reduced poles handling time and high production rate, covering the production of lighting poles, distribution poles and high mast.
  Bota-weld’s Welding Machine for Single & Double Shell Poles process independently conical round & polygonal pole starting from top or bottom diameter independently, up to 1250 mm diameter and process single and double shell poles. This machine is suitable for being inserted in an automatic line, downstream of the presses.
  The innovative coupling system is fully automatic; the shells are located on two different lines. One of the shells is raised through a cylinder and locked, thanks to the couplers is overturned on the second shell. The pole is pulled in the welding machine to start the welding operation. Thanks to its innovative coupling system, no bridge crane or special tools will be required to manage and couple the shells, reducing the coupling time (20 sec), making it in accurate way and in safety.
  This machine allows, starting from a bended trapezium, to weld the joint apply the correct force from the side and from the top in order to close the joint but without any shape deformation. To do that the machine check the value of the force applied and change it in according with the mechanical resistance (diameter and thickness).
  Bota-weld’s Welding Machine for Single & Double Shell Poles, in case of double shell welding, weld simultaneously two joints with two torches. This allows to reduce the cycle time because on the same time you weld two joints and you don’t need to rotate and move twice the pole through the welding machine.
  All the process is managed by only one operator for parameters setting (poles length, top and bottom diameter, thickness) and supervisor.
  Make a good pole, straight and good welded, it’s the first condition to don’t lose time and money on the repairing station.
  WELDING SPEED FOR MAG WELDING TECHNOLOGY
TOP